Areas Of Use - Stiga SENATOR Manual De Instrucciones

GB
The switch is used to adjust the cutting
height in continuously variable positions.
The contact used for connecting the cutting deck is
mounted on the right side, in front of the front tyre
(fig. 2).
17. REAR RAKE (Pro20)
The machine has been designed for electrical ad-
justment of a rear rake (available as an accessory).
The switch is used to raise and lower the
rear rake.
Cables for connecting the rear rake are found at the
rear of the machine, to the left of the upper side of
the bumper. (Pro16 is prepared for a rear rake).
18. SAND SPREADER (Pro20)
The machine has been designed for electrical adjust-
ment of a sand spreader (available as an accessory).
The switch is used to start and stop the
12V
spreader.
The contact for connecting the sand spreader is
found at the rear of the machine, to the left of the
upper side of the bumper. (Pro16 is prepared for a
sand spreader).
19. DISENGAGING LEVER (Presi-
dent - Royal - Pro16 - Pro20)
A lever for disengaging the variable transmission.
Enables the machine to be moved by hand without
the help of the engine. There are two positions:
1. Lever moved back – transmis-
sion engaged for normal opera-
tion.
2. Lever moved forward – trans-
mission disengaged. The ma-
chine can be moved by hand.
The machine may not be towed over long distances
or at high speeds. The transmission can be dam-
aged.
20. FUEL GAUGE/FUEL CAP
Fuel cap with built-in fuel gauge that indi-
cates how much fuel there is in the fuel
tank (applies to Royal-Pro16-Pro20).
Senator and President have a fuel cap without a
fuel gauge.
The fuel tank holds approx. 11.5 litres.
58
All manuals and user guides at all-guides.com
ENGLISH
The machine may only be used for the following
tasks using the STIGA accessories stated.
1. Mowing
2. Sweeping
3. Snow clearance
4. Grass clipping and leaf collection
5. Grass and leaf transport
6. Sand spreading
7. Weeding on gravel paths
8. Lawn edge trimming
9. Moss scarification
The maximum vertical load on the towing hitch
must not exceed 100 N.
The maximum over-run load on the towing hitch from towed accessories must not exceed 500 N.
Note! Before using a trailer – contact your insur-
ance company.
Note! This machine is not intended to be driven on
public roads.

AREAS OF USE

Using cutting deck 13-2939 (92M), 13-2927/
13-2935 (107M), 13-2917 (110S), 13-2915/13-
2921 (121M) or flail mower 13-1977.
Using brush unit 13-1933 or collector brush
unit 13-1939. Use of dust guard 13-1936 is rec-
ommended with the first option.
Using snow blade 13-0918 or snow thrower 13-
1948. Snow chains 13-1956 (16")/13-0902 (17")
and frame weights 13-0923 are recommended.
Using towed collector 13-1978 (30") or 13-
1950 (42").
Using dump cart 13-1979 (Standard), 13-1988
(Maxi) or 13-1992 (Combi).
Using sand spreader 13-1975. Can also be used
for spreading salt. Snow chains 13-1956 (16")
13-0902 (17") and frame weights 13-0923 rec-
ommended.
Using front mounted hoe 13-1944 and rear-
mounted rake 13-1969.
Using edge trimmer 13-0905.
Using moss scarifier 13-1984.