Cleaning The Air Filter; Engine Management - Stihl MS 200 T Manual De Instrucciones

Cleaning the Air Filter

If there is a noticeable loss of engine
power:
N Squeeze the throttle trigger lockout
and move the Master Control lever
to cold start l .
N Turn twist lock on carburetor box
cover counterclockwise – slot
vertical.
N
Lift off the carburetor box cover
vertically.
N Clean away loose dirt from around
the filter.
MS 200 T
1
N Remove the air filter (1).
4
3 3
2
N
Remove the foam element (2).
N Unscrew the nuts (3).
N Remove the filter base (4).
N Separate the two halves of the filter.
N Wash the filter in a clean, non-
flammable solution (e.g. warm
soapy water) and then dry. Do not
clean flocked air filters with
compressed air, a brush or a cloth.
N
Always replace a damaged filter.
N Reinstall the air filter.

Engine Management

Exhaust emissions are controlled by the
design of the fundamental engine
parameters and components (e.g.
carburation, ignition, timing and valve or
port timing) without the addition of any
major hardware.
English
31