Remove Air Filter; Cleaning The Air Filter - Stihl MS 661 C-M Manual De Instrucciones

Ocultar thumbs Ver también para MS 661 C-M:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

English
Chain
Chain pitch
Minimum
type
groove depth
Picco
1/4" P
0.16" (4.0 mm)
Rapid
1/4"
0.16" (4.0 mm)
Picco
3/8" P
0.20" (5.0 mm)
Rapid
3/8"; 0.325"
0.24" (6.0 mm)
Rapid
0.404"
0.28" (7.0 mm)
If groove depth is less than specified:
Replace the guide bar.
N
The drive link tangs will otherwise
scrape along the bottom of the groove –
the cutters and tie straps will not ride on
the bar rails.
40

Remove air filter

Turn the knob above the rear handle
N
in the direction of the arrow and
remove the carburetor box cover
Remover filter
N

Cleaning the Air Filter

If there is a noticeable loss of engine
power:
Knock out the filter or blow it clear
N
with compressed air from the inside
outwards
If knocking-out or blowing-out does not
suffice, or in the case of stubborn dirt or
stuck filter fabric, the filter must be
subjected to a thorough cleaning.
Always replace a damaged filter.
Thorough filter cleaning
Wash the filter in STIHL special-
N
purpose cleaner (special
accessory) or a clean, non-
flammable cleaning liquid (e.g.,
warm soapy water) – rinse the filter
from inside to out under a water jet
– do not use high-pressure cleaners
Dry all filter parts – do not expose to
N
extreme heat
Do not oil the filter
N
Reinstall filter
N
MS 661 C-M

Capítulos

Tabla de contenido
loading

Tabla de contenido