Cadel Thermostove 28 Manual De Instrucciones página 45

Maintenance and cleaning Thermostove with self-cleaning brazier
All cleaning of all parts must be carried out with the Thermostove completely cold and
unplugged to avoid burns and thermal shock. The Thermostove does not need much
maintenance if used with certified quality pellet. The need for maintenance varies
depending on the conditions of use (switching on and off repeatedly) and depending
on the performance required.
It is recommended periodic monitoring of the Thermostove to check its condition.
Parts
Brazier
Cleaning the ash collection
compartment with suction device
Cleaning ash tray
Exchanger (turbulators)
Flame-shell
Cleaning the interior heat
exchanger /
smoke fan compartment
Cleaning complete exchanger
Clean "T" to exhaust
Flue
Door gasket ash
Internal parts
Flue pipe
Circulation pump
Heat exchanger (where present)
Hydraulic components
Electromechanical components
◊ by the user / • by the authorised qualified technical assistance
BY THE USER
Daily control
Cleaning exchanger - Thermostove off
Fouling act as insulation and the thicker they are, the lower the heat that is transmitted to the water and
to the structure generally. Therefore very important to perform the cleaning of the tube bundle, said
exchanger also, to prevent the fouling of the same and prevent clogging and jamming of the cleaning
device. Pull and push quickly for 5-6 times the lever so that the springs can remove the soot deposited
on the pipes.
Every 2-3
Everyday
days
◊
◊
◊
◊
Every Every 15 Every 30
week days days
◊
Every 60- Every 1
90 days year
•
•
•
•
•
•
•
•
•
•
•
45