Remote Control - Cadel Thermostove 28 Manual De Instrucciones

Remote Control

The remote control (Fig. 3) used to adjust water
temperature power and the on/off functions for
the pellet thermostove.
To start the thermostove, press key and the stove
will automatically enter the starting phase.
Press keys + (1) and - (2) to adjust temperature,
and use keys + (6) and - (5) to adjust operating
power. To turn off the thermostove, hold down
key .
To replace the 3 volt battery located on the back
of the remote control, pull the centre of the cover
and the lever on the side of the same, replace the
Fig. 4
Fig. 3
battery observing the correct polarity (Fig. 4)
16