Connecting Triple Transducer Connect - SonoSite MDS Lite Manual Para El Usuario

Connecting Triple Transducer Connect

The Triple Transducer Connect is a three-transducer module for the MDS Lite that allows connection
of up to three transducers simultaneously while the ultrasound system is docked.
Connect
transducer
connector to
system
Figure 6 Connect Transducer Connector to System
Connect
transducer to
Triple
Transducer
Connect
14 Connecting Triple Transducer Connect
1 Rotate system latches outward.
2 Remove any transducer attached to the system.
3 Pull the transducer latch up and rotate 90°.
4 Hold the system at an angle.
5 Align and insert the transducer connector to the connector on the bottom of
the ultrasound system.
6 Turn the latch back 90° and press in, securing the transducer connector to the
ultrasound system.
7 Place the ultrasound system on the system platform, ensuring that the cable is
positioned between the handles of the MDS Lite.
8 Secure by rotating system latches inward.
Ultrasound
system
Transducer
connector
Transducer
select buttons
1 Pull the transducer latch up and rotate 90°.
2 Align and insert the transducer connector to the connector on the bottom of
the Triple Transducer Connect.
3 Turn the latch and press down, securing the transducer connector to the Triple
Transducer Connect.