SonoSite MDS Lite Manual Para El Usuario página 11

Attach 1 Turn off the ultrasound system.
mini-dock
The mini-dock may not function properly if you connect the system while the
power is on.
2 Place the mini-dock on the system platform.
3 Slide the mini-dock feet under the ultrasound system and firmly press the
mini-dock into the system connector.
The mini-dock is correctly attached when there is no gap between the system
and mini-dock. See
Note: If at any time the ultrasound system should lose connectivity, turn off the
system and reattach the mini-dock and system.
Note: Always verify that the mini-dock and system are correctly attached after
changing a transducer. When you change a transducer, the mini-dock may loosen.
Mini-dock
Figure 4 Attach Mini-Dock
Lock or unlock Press down on the locking levers on the front wheels to lock, and push up to
wheels unlock.
Figure 4.
System
MDS Lite Features 7