Connecting The Sitestand To Ac Power - SonoSite SiteStand Manual Do Usuário

To remove the system from the SiteStand:

Connecting the SiteStand to AC Power

To connect the SiteStand to AC power:
When AC power is connected to a system installed in the SiteStand, the system battery charges. The
system operates on battery power if the AC power is not connected to the SiteStand.
Caution:
Connect the AC line cord to the power connector at the bottom of the SiteStand.
1
Connect the AC line cord to a hospital-grade electrical outlet.
2
8
Chapter 2: Using the SiteStand
Charge the batteries only when the ambient temperature is between 32° and 104°F
(0° and 40°C).
Hold the system by the handle.
1
Press on the release lever to open the sleeve.
2
Carefully remove the system by pulling it up and
3
back.
Remove the transducer.
4