SonoSite MDS Lite Manual Para El Usuario página 16

VCR
Connect
cables
Set up system 1
Record images 1
Play back
images
12 Connecting Printer and DVD Recorder or VCR
1 Lock the wheels.
2 Insert security strap in outer slots, if necessary.
3 Move the device forward to allow access to the connectors, if necessary.
4 Ensure that the mini-dock is connected to the system.
5 Connect the cables. See
Mini-Dock Symbols"
• S-video cables (B) (B). Insert the ferrite end of the cable into the mini-dock.
• RS-232 cable (E), including audio left/right input/output. For Panasonic VCR,
attach VCR adapter (F) to E.
• AC power cord (I)
6 Connect system power cord (K) to a hospital-grade electrical outlet.
7 Fold excess cable behind the device, and insert the cables on either side of
column, using the grommets to secure cables, if necessary.
8 Tighten the strap.
Press the Setup key on the ultrasound system.
2 Select Connectivity.
3 In the Video Mode list, select the appropriate video format: NTSC or PAL.
4 In the Serial Port list, select VCR.
5 Restart the system to activate VCR connectivity.
Note: Because the bar code scanner, DVD recorder, and VCR require the same port
on the mini-dock, you can connect only one of these peripherals at a time.
Ensure that the cables are correctly installed.
2 Turn on the VCR.
3 Ensure that the input switch is correctly set. (See the manufacturer's
instructions for location of switches.)
• Sony: Dip switches: 1-4 Down and 5, 6 Up
• Panasonic: Line
4 Press the Record key or use the controls on the VCR to start and stop recording.
Note: Do a test recording before a patient exam to ensure that all connectivity is
correct.
1 Turn on the VCR.
2 Press the Function key ( ) then V on the system.
3 Press Play on VCR.
Figure 5 on page 9 and
on page 15.
"Cables, Connectors, and