The Buttons At A Glance - Keysight U1211A Guía Del Usuario Y Servicios

The buttons at a glance

The operation of each button is shown below. Pressing a key changes the current
operation, changes the status in the annunciator on the display, and generates a
button-click sound (a beep).
Using the Hold/Max Min button
Figure 1-4
The Hold/Max Min button on the clamp meter has two functions: data hold and
dynamic recording. See
Recording"
Table 1-3 Hold/Max Min button description
Button
In Setup mode, the Hold/Max Min button is designated as a Save button. See
"Selecting Setup Menu"
Keysight U1211A, U1212A, and U1213A User's and Service Guide
Hold/Max Min button
"Data Hold (Trigger Hold)"
on page 56 for more information.
Description
– Press Hold/Max Min momentarily to perform data hold operation. The annunciator display
will indicate DH, which means a reading has been freezed. Press and hold Hold/Max Min for
more than 1 second to disable data hold operation.
– Press Hold/Max Min for more than 1 second (with the data hold function turned off) to
perform dynamic recording mode. The annunciator display will first indicate MAX AVG MIN.
Press Hold/Max Min momentarily to cycle through dynamic recording (maximum, minimum,
or average) functions. Press and hold Hold/Max Min for more than 1 second to disable
dynamic recording function.
on page 64 for more information.
Getting Started
on page 52 and "Dynamic
1
27