Environmental Conditions
This instrument is designed for indoor use and in an area with low condensation.
The table below shows the general environmental requirements for this
instrument.
Environmental cond itions
Operating temperature
Relative humidity
Altitude (operating)
Storage temperature
Storage humidity
Pollution degree
The Keysight U1211A, U1212A, and U1213A Clamp Meter complies with the
NOTE
following safety and EMC requirements:
– IEC 61010-1/EN 61010-1
– IEC 61010-2-032/EN 61010-2-032, IEC 61010-2-033/EN 61010-2-033
– CAN/CSA-C22.2 No. 61010-1
– CAN/CSA-C22.2 No. 61010-2-032, CAN/CSA-C22.2 No. 61010-2-033
– UL Std. No. 61010-1
– UL Std. No. 61010-2-032, UL Std. No. 61010-2-033
– IEC61326-1/EN61326-1
– Canada: ICES/NMB-001
– Australia/New Zealand: AS/NZS CISPR 11
Refer to Declaration of Conformity for current revisions. Go to
www.keysight.com/go/conformity
Keysight U1211A, U1212A, and U1213A User's and Service Guide
Requirements
–10 °C to 50 °C
Maximum 80% RH for temperature up to 31 °C decreasing linearly
to 50% RH at 50 °C
2000 meters
–20 °C to 60 °C
0% to 80% RH non-condensing
Pollution Degree 2
for more information.
http://
7