Setting Auto Power-Off Mode - Keysight U1211A Guía Del Usuario Y Servicios

Multímetros de pinza
Ocultar thumbs Ver también para U1211A:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Setting auto power-off mode

To enable auto power-off mode, set its timer to any value within the range of 1 to
99 minutes.
The instrument will turn off automatically (with auto power-off mode enabled)
after the specified amount of time, if none of the following happens within that
time:
– Any button is pressed.
– A measurement function is changed.
– Dynamic recording is enabled.
– 1 ms peak hold is enabled.
– Auto power-off mode is disabled in the setup mode.
To reactivate the clamp meter after auto power-off, simply press any button.
To disable auto power-off mode, select OFF. When the auto power-off mode is
disabled,
remain turned on until you manually turn the rotary switch to the OFF position.
Initial
Press
to edit the value
Figure 4-4
Keysight U1211A, U1212A, and U1213A User's and Service Guide
in the annunciator display will be turned off. The clamp meter will
or
Setting the auto power-off duration
Changing the Default Settings
Press
or
to edit the value
Press
Press
Press
4
Press
71
Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

U1212aU1213a

Tabla de contenido