Cleaning And Maintenance - Royal Catering RCPR-1325 Manual De Instrucciones

EN
SYMBOLS
The operation manual must be reviewed.
Never dispose of electrical equipment together with
household waste..
This machine conforms to the CE declarations.
Attention! Hot surface may cause burns.
For indoor use only.
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details it may differ
from the actual machine.
The original operation manual is in German. Other language
versions are translations from German.
USER MANUAL
SAFETY INSTRUCTIONS
General safety information for the use of electrical devices:
To avoid injury from fire or electric shock, please ensure
compliance with safety instructions when using this device. Please
read the instructions carefully and make sure that you have
understood them well. Keep the manual near the equipment to be
able to read it at any time. Always use current sources connected
to the ground and providing the necessary voltage (indicated on
the label on the device). If you have any doubt, let an electrician
check that your outlet is properly grounded. Never use a damaged
power cable. Do not open the unit in a damp or wet environment,
or if your hands or body are damp or wet. Protect the unit from
solar radiation. Use the device in a protected location to avoid
damaging the equipment or endangering others. Make sure the
device is able to cool and avoid placing it too close to other devices
that produce heat. Before cleaning, disconnect it from the power
source. Use a soft damp cloth for cleaning. Avoid using detergents
and make sure that no liquid enters the unit. No internal element
of this device needs to be maintained by the user. Opening the
device without our approval leads to a loss of warranty!
SAFETY GUIDELINES
1. Please read these instructions carefully and understand
them before operating the device! Please observe the
safety guidelines carefully in order to prevent damages
through improper use!
2. Please keep this manual available for future reference. If
this device is passed on to third parties, the manual must
be passed on with it.
3. Only use this device indoors and for its intended use.
4. We do not offer any warranty for damages resulting from
improper use or incorrect operation.
5. Check before first use whether main voltage type and
current comply with the indicated data on the type plate.
6. This device is not intended to be used by persons
(including children) with limited physical, sensory or
mental aptitude or lack of experience and/or knowledge
unless they are supervised by a person responsible for
their safety or have received instruction from this person
as to how the device is used.
7. ELECTRICAL SHOCK HAZARD! Do not attempt to
repair the unit yourself. In case of device failures, repair
must be done by qualified experts.
6
U S E R M A N U A L
8. Please check main plug and power cable regularly. If
the power cable for this device is damaged, it has to be
replaced by the manufacturer or its customer service or
another qualified person in order to prevent hazards.
9. Prevent damages to the power cable by avoiding squeezing,
bending or rubbing it on sharp edges and keep it away from
hot surfaces and open flames.
10. ATTENTION! DANGER TO LIFE! While cleaning, never
immerse the device in water or other liquids.
11. Under no circumstances open the housing.
TECHNICAL DETAILS
Product name Popcorn Popcorn Popcorn
machine
machine
machine
Model RCPR-1325 RCPR-2300 RCPR-1350
Voltage [V] 230~ 230~ 230~
Frequency [Hz] 50 50 50
Power [W] 1300 2350 1350
Temperature [°C] 210 – 250 210 – 250 210 – 250
Amount of oil 50 70 50
[ml/once]*
Amount of sugar 50 100 50
[g/once]*
Amount of corn 150 250 150
[g/once]*
*The above-mentioned proportions are approximate and can be
adapted according to the customer's choice and needs.
BEFORE FIRST USE
Upon receipt of the goods, check the packaging for integrity
and open it. If the packaging is damaged, please contact your
transport company and distributor within 3 days and document
the damages in as much detail as possible. Do not turn the
package upside down! When transporting the package, please
ensure that it is kept horizontal and stable. Please keep all
packaging materials (cardboard, plastic tapes and Styrofoam) so
that in case of a problem, the device can be sent back to the
service centre as well – protected as possible.
ATTENTION! After reading the manual, before
first use, please turn on the machine for 30
minutes making sure that the room is ventilated.
The appearance of a small amount of smoke and
the smell of paint is a normal occurrence of a
new product in the process of heat up. Open the
machine and ventilate, also clean using the cleaning
agent dedicated for contact with food products.
Machine is ready for use.
DISPOSAL OF THE PACKAGING
Please keep all packaging materials (cardboard, plastic tapes and
Styrofoam), so that in case of a problem, the device can be sent
back to the service centre in accurate condition!
SAFETY INSTRUCTIONS
1. The popcorn machine should be placed where it has
a strong and stable position (a 3% slant is an advantage).
2. The device should only be connected with an appropriate
power source.
Rev. 21.02.2022
3. The safety switch / power switch should be located near
the machine. The path must be freely accessible.
4. All electrical connections have to be carried out by
authorized personnel only.
CONSTRUCTION OF THE DEVICE
1
7
2
8
3
9
4
10
5
11
6
1. control panel
2. housing
3. handle
4. pot
5. lid
6. pot connection
7. light
8. annealed glass
9. door
10. lower door
11. draw
FRONT PANEL
1 2 3 4
1. WARMING & LIGHT – turning on the interior light and
heating
2. HEAT – turning on the bowl heating
3. TURN – turning on the stir function
4. POWER – switch on the device
(only for model RCPR-1325)
OPERATION
1. Use POWER switch to turn on the device (only for
model RCPR-1325).
2. Set the WARMING&LIGHT switch to ON position.
3. Set the HEAT (2) switch to ON position, add oil, wait for
oil to heat up (3-4 minutes).
4. Then set the TURN switch to ON position, add corn
kernels (and sugar if required), cover with lid – wait for all
the kernels to pop. Remove from pot suing the lever by
the pot to tip out the popcorn.
5. Please note that during the production of popcorn, the
door needs to be closed so that the hot popcorn cannot
escape and cause burns.
6. You can repeat this procedure as often as you want to. It
only takes approximately 2 minutes until the corn pops
steadily.
7. Do not let any oil drop on the hot plate as it can result in
a fire. WARNING: Do not let any water drip on the plate
during the popcorn popping procedure.
Rev. 21.02.2022
EN
8. The device is equipped with a thermostat. If the
temperature exceeds the maximum the machine switches
off automatically to ensure the required safety.
9. When finished, set all switches in OFF position.
ATTENTION: The pot has to be emptied and the heating turned
off as soon as the frequency (approx. 2-3 seconds) of popping
slows down. Only like this, burning of sugar and popcorn as well as
damage to the coating can be prevented. It is not always possible
for all corn to pop. Remove residues after every production cycle.
We cannot assume liability for damages to the pot's coating due
to improper use.

CLEANING AND MAINTENANCE

1. Switch off the device and disconnect the power plug in
order to prevent accidents when cleaning the machine.
2. To clean the device from the outside, use a wet cloth with
some corrosion protection. DO NOT clean the machine
with water as it can damage the electric function of the
device.
3. If the device is not used for a prolonged period of time,
unplug the power plug.
4. DO NOT clean the inside of the device with hard metallic
objects, as this will damage the coating of the machine.
TRANSPORTATION AND STORAGE
During transport, the machine should be protected from shaking,
falling and turning upside down. Store it in a properly ventilated
place with dry air and without any corrosive gas.
CHECK REGULARLY THE DEVICE
Regularly check the machine for signs of damage. If the machine
is damaged, please stop using it immediately and contact your
customer service to solve the problem.
What to do in case of a problem?
Please contact your customer service and prepare the following
information:
• Invoice number and serial number (the latter is to be
found on the technical plate on the device).
• If relevant, take a picture of the damaged, broken or
defective part.
• It will be easier for your customer service clerk to
determine the source of the problem if you give a detailed
and precise description of the matter. The more detailed
your information, the better customer service will be able
to solve your problem rapidly and efficiently!
CAUTION: Never open the device without the authorization of
your customer service. This can lead to a loss of warranty!
7