EMobility eClick Instrucciones De Instalación página 68

68
eClick installation instructions
II.) Commissioning during installation for private use:
1. Enter in the eConfiguration app the installed charging
capacity by selecting the number of connected phases
and the installed amperage.
III.) Commissioning for a (semi-)public installation
(corporate customer):
a) Enter in the eConfiguration app the installed charging
capacity by selecting the number of connected phases
and the installed amperage.
After commissioning, the eBox enters standby mode.
Now you can connect and charge a vehicle. The charging
process is described in detail in the instructions for use
provided with the eBox (also available online).
Congratulations!
You have successfully
completed the installation.
All manuals and user guides at all-guides.com
2. This step can be performed by the end customer or an
electrician: commissioning the eBox with the eCharge+ app
(this will create e.g. an admin account).
b) Select the connection type preferred by the customer
(WLAN or LAN or SIM), and use this to connect the eBox
to the backend.
Caution
Please note down the number
of phases you have connected
and the maximum current on the
next page of these installation
instructions and on the adhesive
label affixed to the eClick.
The customer can then configure
the system himself after a
replacement.