Safety Information - EMobility eClick Instrucciones De Instalación

40
eClick installation instructions

Safety information

Warning of electrical voltage!
Caution: Significant risk of injury or material damage!
Observing this information can improve the product's application.
These installation instructions are
intended for specialised electricians.
The eClick may be installed by qualified,
specialised electricians only. Greater
priority must be given to the accident
prevention regulations, the safety rules
applying nationwide to the specific
operations, and the medical regulations
at the workplace.
The product can be afterwards
commissioned free of faults only after
this document has been observed.
These operating instructions consti-
tute an integral part of the product
and must be available to the fitters,
also after the installation. So keep
this document in a safe place, also
after the installation.
Note in addition that safety is
ensured only when the affected
devices are stored, installed, used,
serviced, and, if necessary, dismounted
and disposed of properly as de scribed
in this document.
All manuals and user guides at all-guides.com
DANGER
Danger to life and limb
CAUTION
Significant risk of injury/material damage
NOTE
Information on optimising the application
• Before installing and using this
product, please read the provided
documentation to familiarise yourself
with the safety regulations and other
information.
• This product has been developed
and tested in compliance with
international standards.
• This product may be used exclusively
for its intended purpose.
• This product may be installed by
qualified personnel only.
• This product is maintenance-free
and cannot be repaired on site.
• Incorrect installations may entail
risks for the user.
• This product is used in combination
with a power source.
• Make sure that the product is
used under the correct operating
conditions only.
• Make sure that the power supply
to this product has been connected
properly to a fuse box with RCD and
circuit breaker.
• The RCD and circuit breaker selected
must be suitable for the electrical
connection and installed in an
upstream fuse box as described in
this document.
• Make sure that the fitted RCD is
serviced at the intervals specified
by the manufacturer.
Before installing, check the specifica-
tions under the grid connection
regulations, the technical connection
requirements, and those issued by
the utility and follow specifically the
compulsory registration, approval,
and listing procedures.
Product subject to modification
without prior notice. This document
might not contain the latest changes
to the product's specifications or
processes described herein.