Commissioning The Ebox - EMobility eClick Instrucciones De Instalación

Checklist
Please read and follow carefully all of the
installation instructions.
• Sealing plug inserted
• Cable routing plates inserted flush
• Contact guard attached
• contact guard secured with seal
• Ribbon data cable between eClick and
eBox not jammed
• Locking clip in end position
• Electrical final inspection successfully completed
• Function test successfully performed
(if eBox is available)

Commissioning the eBox

After the preceding steps, you can switch in the voltage. Bear in mind that the eBox does
not light up until you have approached it within one metre. You are prompted to link to
the eBox via Bluetooth. For this you will need the eConfiguration app. You can download
the corresponding app via the following QR codes:
I.) Configuring with the eConfiguration app
Technical commissioning by the electrical installer with the
eConfiguration App is always necessary.
All manuals and user guides at all-guides.com
Commissioning the eBox
Danger
This product contains antenna
that emit electromagnetic fields
which can interfere with other
electronic devices such as cell
phones and medical devices if
exposed to prolonged time periods
at distances less than 3,5 cm. If
prolonged exposure is expected,
it is recommended to keep a
minimum distance of 20 cm to
avoid interference.
67