66
eClick installation instructions
07
Tighten the two grub
screws using the allen
wrench at the rear left
and rear right of the eClick
to secure the locking
mechanism in place and
the eBox on the eClick.
All manuals and user guides at all-guides.com
Caution
Make sure that the eBox clicks
correctly into the eClick.
Marking of the locking clip is in
end position. Grub screws are
fully screwed in.
Check box for tight fit.
08
Power on the eClick circuit.
Note
The grub screws should only be
fully inserted when the locking
clip is fully inserted.
Assembly
is done!