64
eClick installation instructions
Clicking the eBox into the eClick
After the electrical installation, the eBox can be clicked into the eClick.
Before mounting the eBox, make sure there is no voltage across the eClick.
01
If an eSmartMeter is
installed, make sure the
ports are connected to
the supplied data cable.
Connect port 3a (eSmart-
Meter) to port 3b (eClick)
using the data cable.
Take the eBox and identify
the connecting points
(here red) on its rear side.
All manuals and user guides at all-guides.com
02
Connect the black ribbon
data cable of the eBox
to the port "5 Expansion
Terminal" at the bottom
right of the eClick.
03
If the eBox / eClick is to be
connected online via a router
using a LAN cable, place
the white ribbon data cable
of the eBox on port 1 on
the left of the eClick.
3a
3b
1
2a
6
2b
4
5
1
LAN 1 RJ45 (eBox communication)
2a
LAN 2 RJ45 (deactivated)
2b
LAN 2 LSA-Plus (deactivated)
3a
eSmartMeter output (optional)
3b
eSmartMeter input (optional)
4
Cable clips for S/FTP cable
5
Expansion terminal (eBox communication)
6
LAN 1 LSA-Plus to internet router
90°