Intended Use; Items Supplied - Hilti TE 2-22 Manual De Instrucciones Original

Forward/reverse switch with
%
transport lock
Control switch
&
Grip
(
Installation opening for acces-
)
sories

3.2 Intended use

The product described is a cordless SDS­Plus rotary hammer drill. It is
designed for drilling in masonry and for hammer-drilling in concrete and
masonry.
• For this product, use only Hilti Nuron lithium-ion batteries of the B 22
series. For optimum performance, Hilti recommends the batteries stated
in the table at the end of these operating instructions for this product.
• For these batteries, use only Hilti chargers of the type series stated in
the table at the end of these operating instructions.

3.3 Items supplied

SDS­Plus rotary hammer drill, side handle, depth gauge, operating instruc-
tions.
Other system products approved for use with this product can be found at
your local Hilti Store or at: www.hilti.group
3.4 Status indicators of the Li­ion battery
Hilti Nuron Li-ion batteries can indicate state of charge, fault messages and
the battery's state of health.
3.4.1 Indicators for state of charge and fault messages
WARNING
Risk of injury by a falling battery!
▶ If the release button is pressed with a battery inserted in the product,
subsequently check that the battery is correctly re-engaged and secure.
Short-press the release button of the battery to get whichever of the following
status indications is applicable at the time.
State of charge and, if applicable, faults are indicated constantly as long as
the connected product is switched on.
Status
Four (4) LEDs show constantly
green
Three (3) LEDs show constantly
green
*2266025*
+
§
/
:
∙
Meaning
State of charge: 100 % to 71 %
State of charge: 70 % to 51 %
2266025
Battery
Battery release button
Battery status indicator
Grip
Depth gauge
English 9