Operation; Pre-Ride Inspection - Honda CRF150F 2017 Manual Del Propietário

CRF150F

OPERATION

Pre-ride Inspection

For your safety, it is very important to take a few
moments before each ride to walk around your
motorcycle and check its condition. If you detect
any problem, be sure you take care of it, or have it
corrected by your Honda dealer.
W
!
arning
Improperly maintaining this motorcycle or

failing to correct a problem before riding can
cause a crash in which you can be seriously hurt
or killed.
Always perform a pre-ride inspection before every

ride and correct any problems.
1. Engine oil level – add engine oil if required
(page 24). Check for leaks.
2. Fuel level – fill fuel tank when necessary (page
22). Check for leaks.
3. Brakes – check operation;
Front: Make sure there is no brake fluid leakage
(page 17);
Rear: Adjust free play if necessary (pages 18 and
19).
4. Tyres – check condition and pressure (pages 25
– 27).
5. Spokes and rim locks – check and tighten if
necessary (page 59).
6. Drive chain – check condition and slack (page
55). Adjust and lubricate if necessary.
7. Chain slider – check slider wear (page 55).
8. Throttle – check for smooth opening and full
closing in all steering positions. Adjust free play
if necessary (page 53).
9. Clutch – check operation, and adjust if necessary
(pages 20 and 21).
10. Spark plug and high tension terminal – check for
looseness.
11. Engine stop button – check for proper function
(page 29).
12. Nuts, bolts, fasteners – check the front wheel to
see that the axle nut and axle holder nuts are
tightened securely. Check security of all other
nuts, bolts, and fasteners.
31