Installing The Door Station; Fastening And Wiring The Door Station - SOMFY V 350 Manual De Instalacion Y Uso

V®350 video entry phone
Avoid installing the camera facing a light source, as images of visitors may be impaired.
We recommend that you install the door station at a height of approximately 1.60 m.
5.1 Fastening and wiring the door station
[1]. Route all the cables into the rain shield.
[2]. Fix the rain shield to the wall/pillar.
[3]. Connect:
• the monitor cable to the first 2 terminals on the door station:
M+ on the monitor to M+ on the door station
M- on the monitor to M- on the door station
• the electric latch/lock cable to terminals L+ and L-
on the door station.
• the motorisation cable to the dry contact output (COM and NO) on
the door station
Note: To feed the cables into the terminals, use a screwdriver to press
on the square with the notch, feed the wires in, then release.
[4]. Position the door station in the rain shield.
[5]. Screw the door station to the rain shield using the tamper-proof
torx key provided.
Copyright© 2021 SOMFY ACTIVITES SA. All rights reserved.

5 - INSTALLING THE DOOR STATION

M- M+ L- L+ NO COM NC
Monitor cable
Electric latch/lock cable
EN
Gate motorisation cable
8