Setting The Hdmi Video - Yamaha DVD-S661 Manual De Instrucciones

Setting the HDMI video

When you connect this unit to an HDMI
compatible component via the HDMI jack,
select the following video output settings
depending on the connected component.
1 In "VIDEO SETUP PAGE", press 5/a
to highlight [HDMI SETUP], and then
press 3.
2 Press 5/a to highlight an option.
3 Press 3 to enter a submenu.
WIDE SCREEN FORMAT
Set the aspect ratio of the projected images on
the screen. This feature is only available when
making HDMI connections and [TV
DISPLAY] is set to [16:9] (see page 27).
SUPERWIDE
Select to display a 4:3 image on the 16:9 screen
with non-linear stretching (center position of
screen is stretched less than the sides). This
feature is not available when the resolution is
480p or 576p.
4:3 PILLAR BOX
Select to display a 4:3 image on the 16:9 screen
without stretching. When playing a disc recorded
in the 16:9 image, the image is displayed in its
original aspect ratio (16:9) without pillar boxes.
OFF
No aspect ratio adjustment is made when this
option is selected.
HDMI VIDEO
Set the resolution depending on the monitor
you are using.
480P
480 progressive-scan video
576P
576 progressive-scan video
720P
720 progressive-scan video
1080I
1080 interlace video
AUTO
The resolution is automatically selected to
match the monitor you are using.
Notes
• For settings other than [AUTO], HDMI video
signals may not be output properly if a resolution
output setting is not supported by the HDMI
component you are using. In that case, follow the
steps below to return to the initial setting.
1 Press OPEN/CLOSE (
to open the disc tray.
2 Press 2.
3 Press SUBTITLE.
Do not perform this operation while playing back
a disc on this unit.
• You cannot set [TV TYPE] and
[PROGRESSIVE] when making HDMI
connections.
• When disconnecting the HDMI cable, the setting
of [TV TYPE] may be changed. If the component
video, S-video or composite video signal is not
output correctly, see "Troubleshooting" on
page 34 to set the correct TV type again.
HD JPEG
This unit can display High-Definition JPEG
images when connecting to an HDMI
component.
ON
Displays JPEG pictures with high quality.
OFF
Displays JPEG pictures with standard quality.
Notes
• You can select [HD JPEG] when the HDMI video
signals with 720p or 1080i are output.
• When [HD JPEG] is set to [ON] and HD JPEG
pictures are displayed, video signals other than
HDMI signals are not output.
• You cannot select [HDMI VIDEO] and [HD
JPEG] when HD JPEG pictures are displayed.
Setup Menu
) on the front panel
29
En