Adjusting Picture Settings - Yamaha DVD-S661 Manual De Instrucciones

Setup Menu
Notes on activating progressive scan:
• Ensure that your TV is equipped with
progressive scan.
• Connect using a component video cable.
• When making HDMI connections, you
cannot select [PROGRESSIVE].
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE
FULLY COMPATIBLE WITH THIS PRODUCT
AND MAY CAUSE ARTIFACTS TO BE
DISPLAYED IN THE PICTURE. IN CASE OF 525
OR 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT THE
USER SWITCH THE CONNECTION TO THE
"STANDARD DEFINITION" OUTPUT. IF THERE
ARE QUESTIONS REGARDING OUR VIDEO
MONITOR COMPATIBILITY WITH THIS MODEL
525P AND 625P DVD PLAYER, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.
This unit is compatible with the complete line of
Yamaha products, including the projectors
DPX-1300, DPX-830 and the plasma monitor
PDM-4220.

Adjusting picture settings

This unit comes with three predefined sets of
picture color settings and one personal setting
that you can define yourself.
1
In "VIDEO SETUP PAGE", press 5/a to
highlight [PICTURE SETTING], and then
press 3.
STANDARD
Select this for the standard picture setting.
BRIGHT
Select this to make the TV picture brighter.
SOFT
Select this to make the TV picture softer.
PERSONAL
Select this to personalize your picture color by
adjusting the brightness, contrast, tint and
color (saturation).
28
En
2
Press 5/a to select a setting, and then
press ENTER.
3
If you select [PERSONAL] in step 1,
proceed to steps 4-7.
➜ The "PERSONAL PICTURE SETUP"
menu appears.
PERSONAL PICTURE SETUP
BRIGHTNESS
CONTRAST
TINT
COLOR
4 Press 5/a to select one of the following
options.
BRIGHTNESS
Increase or decrease the value to brighten or
dim the picture. Zero (0) is the average
brightness setting value.
CONTRAST
Increase or decrease the value to sharpen or
dull the picture. Zero (0) is the average contrast
setting value.
TINT
Increase or decrease the value to darken or
lighten the picture. Zero (0) is the average tint
setting value.
COLOR
Increase or decrease the value to enhance or
fade the picture. Zero (0) is the average color
setting value.
5
Press 2 / 3 to adjust the setting that best
suits your personal preference.
6
Repeat steps 4-5 to adjust other color
features.
7
Press ENTER.
Note
All picture settings are not available for HDMI
output.
0
0
0
0