Philips AVENT SCF393/61 Manual Del Usuario página 16

English
16
4A. Push the inner part
of the cushion into the
funnel against the line
(indicated with an
arrow).
7. Connect the tube(s)
to the motor unit.
Motor unit part description
1 3
2 4
8
7
5. Place the silicone
diaphragm in the pump
body.
8. Insert the adapter
into the power outlet
and insert the small
plug at the other end
into the motor unit.
1 USB power inlet
5
2 On/off button with
6
pause/play function
3 Mode selection button
4 'Level down' button
5 'Level up' button
6 Indicator lights for modes
and levels
7 Tubing port for single
breast pump
8 Tubing ports for double
breast pump
5A. Make sure that the
silicone diaphragm fits
securely around the rim
by pressing it down with
your thumbs.
9. The breast pump is
now ready for use.
6. Attach the silicone
tube and cap onto the
silicone diaphragm.
Push down the cap
until it is securely in
place.
Note: You can place
the cover over the
cushion to keep the
breast pump clean
when you take it with
you and while you are
preparing for
expressing.