Low Battery Mode; Language; Pet Settings; Master Access - Petsafe Passport Manual De Adiestramiento

low Battery Mode

When powered by the rechargeable battery, the Cat Flap enters Low Battery Mode before the battery becomes
too low to properly operate the flap An alert will appear on the LCD Screen when the Cat Flap enters Low
Battery Mode In Low Battery Mode, the flap shutdown position can be set to either Open or Locked Also an
optional audible beep can be set to notify you when the battery is low The factory settings for Low Battery
Mode are Locked for the flap shutdown position and Off for the audible beep
To Change low Battery Mode:
1 From Main Menu select Setup > Door Settings. Use down arrow
key to highlight low Battery Mode Press right arrow key to select
2 Use down arrow key to highlight which setting to change Use right
arrow key to change the setting Press left arrow/back key to return to
Main Menu

language

The default language setting is English The Language screen allows the language to be changed
To Change language:
1 From Main Menu select Setup > Door Settings Use down arrow
key to highlight language and right arrow key to select
2 Use up and down arrow keys to highlight desired language Press right
arrow key to change language Press left arrow/back key to return to
Main Menu
The Cat Flap allows you to set the same access option and settings for all pets with the Master Access option or to set access and custom settings by
individual pet within the Pet Settings menu
To open the Pet Settings menu, from the Main Menu select Setup > Pet Settings The Pet Settings screen displays the following options:
Master Access: Easily allows the same pet access mode and pet settings
to be set for all pets This is the default factory pet setting for all pets when
first programmed to the Cat Flap
Add Pet: Allows additional pets to be programmed to the Cat Flap Up to
20 pets can be programmed
All pets that have been successfully programmed to the Cat Flap will also
show under Pet Settings menu below Add Pet

Master Access

With Master Access, you can easily set the same access option and settings for all pets programmed without the need to individually program by
pet Master Access is the default access setting when pets are first programmed Flap operational mode must be set to Smart Mode for Master
Access setting to work (see "Flap Operational Modes")
To open the Master Access menu from Main Menu select Setup > Pet
Settings > Master Access Under the Master Access menu you will
find the following options:
Mode: Access mode for any pet set to Master Access There are four
access modes: In/Out (which is default factory setting), In-Only, Out-
Only, and Timer
Re-latch Time: Amount of time the multi-point Locking U-Flap system
takes to re-latch and lock once a microchip/Passport
detected for any pet set to Master Access

PeT SeTTINGS

™ Key is no longer
www.petsafe.net 5