Tabla de contenido
Idiomas disponibles
Idiomas disponibles
en-us
Connecting the appliance
After installing
the appliance,
wait at least 1 hour until
the appliance
starts up. During transportation
the oil in
the compressor
may have flowed
into the refrigeration
system.
Before switching
on the appliance
for the first time,
clean the interior of the appliance
(see chapter
"Cleaning
the appliance").
Electrical
connection
_.
WARNING:
Avoid the risk of an electric shock!
WARNING:
Insert into a grounded
3-phase
socket.
Never
remove grounding
phase. Do not use any
adapters.
Do not use any extension
cables.
WARNING:
Non-compliance
with these instructions
may
result in death, fire or an electric
shock.
Improper
connection
of the protective
conductor
may result in an electric
shock.
If you are in
doubt whether
the appliance
has been grounded
properly,
have the appliance
tested
by
a qualified
electrician
or service
technician.
Do not use extension
cables
or distributors.
This
appliance
must be connected
to a permanently
installed
socket.
The socket
must be near the appliance
and also freely
accessible
following
installation
of the appliance.
The appliance
complies
with protection
class I.
Connect
the appliance
to 115 V/60
Hz alternating
current via a correctly
installed
socket
with protective
conductor.
The socket must be fused with a 10 to 16 A
fuse.
The appliance
comes with a UL registered
3-wire power
cord. The appliance
requires
a 3-pole socket.
Please observe
the following
table with regard
to this:
Appliance
Maximum simultaneous load
Fridge-freezer
6.0 amps
Check on the rating plate whether
the indicated
voltage
and current
type correspond
with the values
of your
power supply. The location
of the rating plate can be
found in the chapter entitled
Customer
service.
_,
WARNING:
Never connect
the appliance
to electronic
energy
saver plugs.
Our appliances
can be used with mains and
sine-controlled
inverters.
Mains-controlled
inverters
are used for photovoltaic
systems
which are connected
directly
to the national
grid.
Sine-controlled
inverters
must be used for
isolated
applications
(e.g. on ships or
in mountain
lodges)
which are not connected
directly
to the national
grid.
6
Capítulos
Tabla de contenido
