Pleasant Hearth OFG419T Manual Del Usuario página 11

ASSEMBLY INSTRUCTIONS
5. Post (F) Installation
Attach four posts (F) to the bottom plate (I)
with four M6 X 30 bolts (CC). The tank hole on the
bottom plate (I) should be in front as pictured. Tighten
with screwdriver (II) and wrench (HH).
Hardware Used
CC
Bolt M6 X 30
Phillips Screwdriver
II
Wrench
HH
6. Hang the chain (H) from the posts (F) as illustrated in
figure 6 so that it connects from corner to corner. When
the fire table is fully assembled, the tank will be placed
in the tank hole on the bottom plate (I). Make sure that
the chain is positioned so that it will not block the tank.
5
X 4
6
F
11
F
CC
I
H
I