© MOSA
1.0-11/99
INSTALLATION AND ADVICE BEFORE USE
GASOLINE ENGINES
■
Use in open space, air swept or vent exhaust gases,
which contain the deathly carbone oxyde, far from
the work area.
DIESEL ENGINES
■
Use in open space, air swept or vent exhaust gases
far from the work area.
POSITION
Place the machine on a level surface at a distance of at
least 1,5 m from buildings or other plants.
Maximum leaning of the machine (in case of dislevel)
INSTALLATION AND ADVICE
GE_, MS_, TS_
Check that the air gets changed completely and the hot
air sent out does not come back inside the set so as to
cause a dangerous increase of the temperature.
☞
Make sure that the machine does not move during
the work: block it possibly with tools and/or devices
made to this purpose.
MOVES OF THE MACHINE
☞
At any move check that the engine is off, that there
are no connections with cables which impede the
moves.
PLACE OF THE MACHINE
In spots where it often rains and/or there are
flooded areas, do not put the machine:
■
in the bad weather
■
in flooded places.
Protect all the electric parts at risk, because water
infiltrations could cause short circuits with damages
at persons and/or things.
The protection degree of the machine is put on the data
plate and in this manual at page "Technical Data".
M
2.6
