Petsafe Aqua Fountain MWW19-15763 Manual De Instrucciones página 7

6. Insert the Charcoal Filter. The filter will fit in the slots on the inside of the Housing.
Make sure it is pushed all the way down and that the black side of the Charcoal
Filter is facing out toward the Bowl (Fig. 2 & 3).
Fig. 2
7. Place the Pet Fountain in a desired location. To protect your floor always use a
protective mat, such as a towel or water-resistant placemat. This will help protect
your floor from splashing or spills caused by your pet.
8. Fill the Pet Fountain by pouring water directly into the Bowl and the Housing, this
will prime the Pump. Leave at least 6 mm to 12 mm of space between the water
level and the rim of the Bowl.
9. Attach the Housing Lid to the Housing, press down until you hear it snap in place.
10. Before you plug in the Pet Fountain, make sure the electrical power cord, the
Adaptor and your hands are dry.
1 1. Connect the In-Line Plug and make sure no
silver is showing, then plug the Adaptor into a
standard electrical wall outlet (Fig. 4).
12. Add water to the Bowl as needed. Never
let the water level fall below 13 mm from
the base of the Bowl or you might risk
Pump failure. Replacement Pumps are sold
separately by contacting the Customer Care
Centre. Visit www.aquapetfountain.com for a telephone listing of the Customer
Care Centre near you.
Filter Slots
www.aquapetfountain.com
Fig. 3
Fig. 4
7