The Pet Fountain And Your Environment - Petsafe Aqua Fountain MWW19-15763 Manual De Instrucciones

5. Rinse the filter throughly under cold water to remove any loose charcoal dust.
Insert the filter into the Housing and make sure the black side of the filter is facing
out toward the Bowl (Fig. 19).
6. Replace the Housing Lid. Place the Pet Fountain in desired location and fill the unit
with water (Fig. 20).
Fig. 19
7. Make sure your hands and the cord are dry, connect the In-Line Plug to the
Adaptor and Plug into an electrical outlet.

The Pet Fountain and Your Environment

If you live in a humid environment and have problems with mould or algae, soak all
Pet Fountain parts in a diluted vinegar solution (20% white vinegar and 80% water)
for 10 minutes after regular cleaning. Also, pour the diluted vinegar solution into the
Pump's motor cavity.
If you have hard water, small white mineral deposits may form on or inside the Pump.
This can eventually prevent the impeller from turning properly. To avoid replacement or
damage to the Pump, please take the following precautions:
• Clean the Pump more frequently
• Clean the Pump with a diluted vinegar solution weekly
• Use bottled water instead of tap water
Fig. 20
www.aquapetfountain.com
13