Petsafe Aqua Fountain MWW19-15763 Manual De Instrucciones página 11

4. Once the Stator is removed, you can
remove the Impeller (white, 3-bladed
propeller), which is held in place
magnetically. To remove the Impeller, use
a fingernail to get underneath the plastic
blade and lift out (Fig. 11).
5. Once the Pump is completely
disassembled, you can clean the parts with
warm water and soap. Use a cotton swab
or the "motor brush" from the Cleaning Kit
to clean inside the Pump's motor cavity
and remove any build-up (Fig. 12). For
added disinfecting and hard water
removal, clean the Pump's motor with a
diluted white vinegar solution (20% white
vinegar and 80% water).
Fig. 12
6. Once the parts are clean you can reassemble the Pump for use.
a) Replace the Impeller.
b) Replace the Stator.
c) Replace the Faceplate.
www.aquapetfountain.com
Fig. 11
11