Mounting The Cutting Attachment - Stihl FS 110 Manual De Instrucciones

English
Fitting the Skirt and Blade
4
4
1
5
WARNING
These parts must be fitted to the
deflector (1) when you use a mowing
head.
Slide the lower guide slot of the skirt
N
(4) onto the deflector (1) – it must
snap into position.
Push the blade (5) into the upper
N
guide slot on the skirt and line it up
with the first hole.
Insert the screw and tighten it down
N
firmly.
24
Mounting the Limit Stop
7
6
WARNING
Always fit the limit stop (6) when you use
a circular saw blade.
Position the limit stop (6) on the
N
gearbox flange.
Insert the screws (7) and tighten
N
them down firmly.
Mounting the Cutting
Attachment
Placing power tool on the ground
Shut off the engine.
N
Lay your power tool on its back so
N
that the cutting attachment
mounting face is pointing up.
Mounting Hardware for Cutting
Attachments
The mounting hardware supplied
depends on the cutting attachment that
comes as original equipment with the
new machine.
If mounting hardware is packed with
machine
Mowing heads and metal cutting
attachments may be mounted.
FS 110, FS 110 R