Mounting The Cutting Attachment - Stihl FS 85 Manual De Instrucciones

Ocultar thumbs Ver también para FS 85:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Mounting the Blade
Slide the line limiting blade into the
N
guide on the skirt.
Insert the screw and tighten it down
N
firmly.
Mounting the Limit Stop
7
6
WARNING
Risk of injury from thrown objects and
contact with the cutting attachment.
Always fit the limit stop (6) when you use
a circular saw blade.
Position the limit stop (6) on the
N
gearbox flange.
Insert the screws (7) and tighten
N
them down firmly.
FS 85, FS 85 R
Mounting the Cutting
Attachment
Placing power tool on the ground
Shut off the engine.
N
Lay your power tool on its back so
N
that the cutting attachment
mounting face is pointing up.
Mounting Hardware for Cutting
Attachments
The mounting hardware supplied
depends on the cutting attachment that
comes as original equipment with the
new machine.
Machine Supplied without Mounting
Hardware
1
Only mowing heads may be used which
mount directly to the shaft (1).
Machine Supplied with Mounting
Hardware
Mowing heads and metal cutting
attachments may be mounted.
2
3
4
Depending on the cutting attachment, it
may be necessary to use the nut (2),
rider plate (3) and thrust washer (4).
These parts are included in a kit
supplied with the machine and are also
available as special accessories.
English
71

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Fs 85 r

Tabla de contenido