Test Mode; Display Test - NAMCO TEKKEN 5 SUPER DX Manual Del Operador

4-2

Test Mode

To enter Test Mode set the Test switch in the cabinet (if fitted) to ON, or if no Test
switch is fitted to the cabinet, set Option switch 1 ON
Note: The test mode is activated only when the cabinet Test switch or Option switch
1 is moved from OFF to ON. If the game is switched on with either switch in
the ON position the Test Mode will not be activated. The switch must be
switched OFF and then ON to enter the test mode.
When the Test Mode is entered, the following screen is displayed.
Use the Joystick Up or Down to step through the tests. (The selected test will be
displayed in red)
SYSTEM 256 TESTMODE

DISPLAY TEST

INPUT TEST
GAME OPTIONS
COIN OPTIONS
SOUND TEST
JVS STATUS
BOOKKEEPING
DATA CLEAR
CARD OPTIONS
CLOSE SETTING CARD
EXIT & SAVE
Enter:
Press the 1 Player Button 1 to enter the selected test.
After making adjustments select EXIT and press the 1 Player Button 1 to return to the
above screen. Select another test or select 'EXIT & SAVE' and press the 1 Player
Button 1 to save the changes and return to the Game Mode.
Note: If 'EXIT &SAVE' is not selected and activated, any changes made may not be
stored properly. Switching the cabinet Test switch or Option 1 switch OFF does
not exit the Test Mode.
Switch the cabinet Test switch or Option 1 switch OFF.
1 2 3 4
S/N:000000-000000
Loaded software:*****
P1 -BUTTON 1
Page 34
Software serial No.
Monitor Adjustments
Tests all switches
Set Game options
Set Price of Play
Sound test
Not used
Bookkeeping
Data clear
Not used on this game
Not used on this game
Exit from test mode