Tabla de contenido
Idiomas disponibles
Idiomas disponibles
7-11
Replacing the Steering Motor or Drive Belt
1.
Remove the steering assembly.
2.
Slacken the adjustment screw (hex head M6x60).
3.
Slacken the 4off hex nuts (M5) to remove the tension from the belt.
Hex head screw (Mx60)
4.
Replace the drive belt.
5.
Remove 4off pozi head screws (with flat and spring washers) and replace the Motor.
6.
Refit (finger tight) the pozi head screws (with flat and spring washers).
7.
Tighten the adjustment screw (M6x60) to tension the belt correctly.
Note: Do not over tension the drive belt.
8.
Retighten the pozi head screws (with flat and spring washers).
9.
Refit the steering assembly.
Note:
After replacing the motor or drive belt ensure that the game is re-initialized.
(see 5-4 page 40)
92
(see 7-9 page90)
Hex nut (M5)
Belt
Tabla de contenido
