7-10
Replacing the Steering Potentiometer
1.
Remove the steering assembly.
2.
Remove 2off hex socket head screws (M4x10) holding the potentiometer
mounting bracket to the front plate.
3.
Slacken the grub screw (M4x10) and remove the potentiometer complete with the
mounting bracket.
Hex socket head screw (M4x10)
screw (M4x10)
4.
Replace the potentiometer taking care to replace the correct colour wire to the
correct terminal.
5.
Reassemble in reverse order.
Note:
When refitting the potentiometer ensure that the grub screw engages on the flat
of the potentiometer shaft.
6.
After replacing the potentiometer ensure that the game is re-initialized.
5-4 page 40)
(see 7-9 page 90)
Mounting bracket
Potentiometer
(see
91