Errors Related To The Camera Assy - NAMCO Grand Prix 2 Manual Del Operador

Symptom
The self-test after power
ON results in the display of
the "Item Button Error"
message on the monitor,
and the machine does not
start. (The Item Button
remains in ON status.)
The monitor displays the
"Wheel Error 07" message
during game play, and the
machine stops operating.
The monitor displays the
"Wheel Error 08" message
during game play, and the
machine stops working.
The monitor displays the
"Wheel Error **" message
during game play, and the
machine stops working.
(** indicates a number
other than 07 or 08)
7-3-2

Errors related to the Camera Assy.

Symptom
The Self Test after power
On results in the display
"Camera Error" message
on the monitor, and the
machine does not start
The monitor displays the
image of the seat of
another machine
The Attract screen
displays "You may not use
the camera now"
message.
The Attract screen does
not display the image
captured by the camera
The monitor displays the
"You may not use the
camera now" message
during the photshooting in
game play
Main Course
The Item Button is being pressed
when the machine starts up.
The Item Button is remaining in
the depressed condition.
The potentiometer is faulty
The Steering PC Board is faulty
The Steering PC Board is faulty
Main Course
The connector is disconnected
The Namcam2 (camera) is
defective
The PCB ID is set incorrectly
The camera is turned off
Communication is interrupted
The camera is turned off
Action
Remove your hand from the Item
Button and restart the machine.
Contact your distributor
Replace the Potentiometer
Replace the Steering PC Board.
Replace the Steering PC Board
Action
Connect the connector securely
Replace the Namcam2
(camera).
Set the PCB ID in all units
correctly
Turn the camera on (see 6-2-2-1
page 51)
Ensure that the communication
cables are connected securely
and the ID settings are correct.
Turn the camera on (see 6-2-2-1
page 51)
81