Fitting The Seat Base Assembly - NAMCO Grand Prix 2 Manual Del Operador

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 10
5-2

Fitting the Seat Base Assembly.

1.
Place the Seatbase assembly close to the Monitor Cabinet and connect the
connector.
2.
Place the Seatbase assembly inside the left Seat Bracket, taking care not to trap
any wires.
3.
Fit, finger tight, 3off socket button head screws (M8x16), with flat and spring
washers.
4.
Fit the right hand seat bracket with 5off socket button head screws (M8x16), with
flat and spring washers.
5.
Tighten all screws fully.
38
Left hand
seat bracket
Seat Base Assy
Right hand
seat bracket
Socket head screws
(M8x16)
Tabla de contenido
loading

Tabla de contenido