Replacing The Camera Assy - NAMCO VAMPIRE NIGHT DX Manual Del Operador

7-3

Replacing the Camera Assy

1. Remove 2off security screws (M5x12), disconnect the connectors and remove
the Camera assy.
2. Remove 2off Whizz nuts (M4) and remove the Camera Mounting bracket.
Whizz nut (M4)
3. Remove 2off pozi head screw (M2x30), Camera Filter (note which way round this
filter is facing), 2off Spacers and the Camera PCB.
Pozi head screw (M2x30)
4. Reasemble in reverse order.
Note: Always reinitialize the guns if the camera has been removed or replaced.
(see 6-2-3-1 page 47)
Security screw (M5x12)
Connectors
CCD Camera
(connector at the bottom)
Connector
Camera filter
(note the direction)
Page 63
Camera Assy
Earth connector
Camera mounting bracket