Replacing The Starter Rope And Rewind Spring - Stihl MS 201 T Manual De Instrucciones

English
Warning!
To reduce the risk of fire and burn injury,
use only spark plugs authorized by
STIHL. Always press spark plug boot (1)
snugly onto spark plug terminal (2) of
the proper size. (Note: If terminal has
detachable SAE adapter nut, it must be
attached.) A loose connection between
spark plug boot and ignition wire con-
nector in the boot may create arcing that
could ignite combustible fumes and
cause a fire.
Installing the spark plug
Install the spark plug and connect
N
the spark plug boot (press it down
firmly) – reassembly all other parts
in the reverse sequence.
36
Replacing the Starter Rope
and Rewind Spring
1
Removing the starter
1
2
Remove screws (1)
N
Lift the fan housing off of the
N
crankcase and pull it away to the
side
Removing the rope rotor
Remove the spring clip (1)
N
Carefully remove the rope rotor
N
with washer (2) and pawl (3)
The rewind spring can jump out –
risk of injury!
1
1 1
1
2
3
Replacing a torn starter rope
Pry the cap out of the starter grip
N
Remove remaining rope from the
N
rotor and starter grip
Thread the new starter rope through
N
the starter handle and secure it by
making a simple overhand knot
Pull the knot into the starter grip
N
Refit the cap in the grip
N
MS 201 T