Stihl MS 201 T Manual De Instrucciones página 41

Removal
Pull off the spark plug boot
N
1
Unscrew spark plug (1)
N
Turn the clutch until the piston is in
N
the lower part of the cylinder
2
Insert the locking strip (2) through
N
the opening as far as it will go into
the cylinder
MS 201 T
2
Fasten the locking strip (2) on the
N
cylinder fin
Turn the clutch clockwise until the
N
piston rests against the locking strip
Loosen the hexagon of the clutch
N
counterclockwise (left-handed
thread)
Unscrew clutch
N
Remove chain sprocket (3) and
N
needle cage (4) from the crankshaft
Clean crankshaft stub and needle
N
cage and lubricate with STIHL
lubricant (special accessory)
Assembly
Fit needle cage and chain sprocket
N
on the crankshaft
Screw the clutch counterclockwise
N
onto the crankshaft
Tighten the clutch with a torque of
N
25 Nm
Remove the locking strip from the
N
cylinder, screw in and tighten the
spark plug
Push the spark plug boot onto the
N
spark plug
English
39