7W186eb1.fm Page 1 Monday, October 28, 2002 4:37 PM
This document provides updated information on the following topics for your system:
•
Updating the system BIOS from diskettes
•
Updating the system BIOS with Dell OpenManage™ Server Administrator
•
Updating the system management module firmware
•
Updating the KVM firmware
•
Updating the network switch module firmware
•
Replacing the server module battery
•
Using the USB diskette and USB CD drives
•
Using the system diagnostics
•
Using the system management module to manage server modules
•
System management module time issues
•
Logging out of a network switch module HTTP session
•
Integrated mirroring issues
•
Online diagnostics SCSI controller test issue when using a Linux console
•
SCSI device errors during system boot
•
Using a Dell-branded, two-button Logitech mouse
Updating the System BIOS From Diskettes
Each server module has a USB port on the front of the server module that allows you to
connect a USB diskette drive. The drive is used to configure the server module, to run
diagnostics, and to update the system BIOS on the attached server module.
NOTE: The USB port can be used only with the USB diskette drive or USB CD drive
supplied by Dell. The USB port will not operate properly with any other USB device.
From a remote system, connect to the Dell Support website at support.dell.com,
1
select the BIOS version that you are updating to, and follow the instructions for
downloading the BIOS file and creating diskettes.
Attach the drive shelf to the front of the system (see Figure 1-1).
2
Ensure that the drive shelf rests on the center handles of the server modules. If it is
placed in the center, you can attach one of the USB drives to any server module.
All manuals and user guides at all-guides.com
Infor mation and Fir mware Update
1-1