Replacing The Gas Cylinder; Troubleshooting - Dometic CC09 Instrucciones De Uso

CC09, CCK09, CC11
8.1

Replacing the gas cylinder

WARNING! Beware of injury
!
Only change the gas cylinder in well-ventilated areas.
Make sure that there are no ignition sources in the vicinity.
Only change the gas cylinder when the device is switched off.
➤ Switch off the hob by turning the control knob clockwise to the neutral po-
sition.
➤ Completely close the valve on the gas cylinder.
➤ Unscrew the pressure regulator from the gas cylinder.
➤ Check the condition of the hose line.
Replace the hose line if the material is brittle or porous.
➤ Screw the pressure regulator firmly onto the new gas cylinder by hand.
9

Troubleshooting

Repairs to the gas supply parts on the device may only be carried out by a
qualified technician.
➤ Shut off the gas supply immediately if a fault occurs.
➤ Check again for any damage to the device.
➤ Replace the damaged parts.
➤ Only use the device again once all the faults have been rectified.
Before you contact customer services about problems with the hob, check:
 The connection to the on-board supply is OK.
 The controller is switched on and the temperature setting is correct.
 The base of the pot or pan and the hob surface are all clean and dry.
 The pot or pan is the correct size and positioned on the cooking zone
properly.
 The base of the pot or pan is level and even.
EN
All manuals and user guides at all-guides.com
Troubleshooting
17