Cleaning And Caring For The Inverter; Rectifying Faults; Guarantee - Dometic WAECO PerfectPower PP402 PAD Instrucciones De Uso

PP402 PAD, PP404 PAD
10

Cleaning and caring for the inverter

A
Caution
Do not use any sharp or hard objects for cleaning since they may
damage the device.
➤ Occasionally clean the device with a damp cloth.
11

Rectifying faults

Fault
No output voltage
The device switches on and
off repeatedly
The inverter switches off
when the consumer is
switched on
The output voltage is too
low.
12

Guarantee

The statutory warranty period applies. If the product is defective, please
contact the manufacturer's branch in your country (see the back of the
instruction manual for the addresses) or your retailer.
For repair and guarantee processing, please include the following docu-
ments when you send in the device:
 A copy of the receipt with purchasing date
 A reason for the claim or description of the fault
EN
Cleaning and caring for the inverter
Cause
No contact to the battery
Overheating
Defective fuse (in the inverter
or the vehicle)
Device defective
Excessive constant load
Starting current too high
Battery voltage below 10.5 V
(PP402 PAD) or 21.5 V
(PP404 PAD)
Remedy
Check contact and cable.
Switch on the ignition if
necessary.
Switch off power consuming
devices.
Let the inverter cool down
and ensure better ventilation.
Replace the fuse with one of
the same specifications.
Replace the device.
Reduce the load.
Compare the device power
with the maximum power of
the inverter.
Charge the battery (start the
engine).
31