Using The Inverter; Cleaning And Caring For The Inverter - Dometic SINEPOWER MSI 212 Instrucciones De Montaje Y De Uso

Using the inverter

8 Using the inverter
I
NOTE
• When operating the inverter at a high load for lengthy periods, it is
advisable to start the engine in order to recharge the vehicle battery.
• You can operate the inverter with the engine running or switched off.
However, do not start the engine while the inverter is switched on,
since the power supply to the cigarette lighter is disconnected
during ignition.
➤ Lift up the cover (fig. 5 2, page 5).
➤ Connect your power consuming device, to the socket (fig. 1 3, page 3) of the
inverter.
➤ Switch the inverter on by pressing the switch (fig. 1 1, page 3) on the device
(position "I") ...
➤ ... or (MSI412, MSI424 only) switch on the inverter using the external switch
(optional).
✓ The green Status LED lights up (fig. 1 2, page 3). The power consuming device
is supplied with voltage.
Charging the device via the USB port
I
NOTE
Also observe the operating manual of the device you want to charge via
the USB port.
➤ Connect the device to the USB port (fig. 1 4, page 3) of the inverter.
9

Cleaning and caring for the inverter

A
NOTICE!
Do not use any sharp or hard objects for cleaning since they may
damage the device.
➤ Occasionally clean the device with a damp cloth.
14
SinePower
EN