Tabla de contenido
Idiomas disponibles
Idiomas disponibles
c) When battery
pack is not in use, keep H away from other
metal objects, like paper clips, coins, keys, nails, screws,
or other small metal objects, that can make a connection
from one terminal to another. Shorting the battery terminals
together may cause bums or a fire.
d) Under abusive conditions, liquid may be ejected
from
the battery; avoid contact. If contact accidentally occurs,
flush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause
irritation or bums.
6) SERVICE
a) Have your power
tool serviced
by a qualified
repair
person
using only identical replacement
parts.
This will
ensure that the safety of the power tool is maintained.
Safety
Instructions
for All Saws
a) _DANGER:
Keep hands
away from cutting area and
the blade. Keep your second hand on auxiliary handle,
or motor housing. If both hands are holding the saw, they
cannot be cut by the blade.
b) Do not reach underneath the workpiece. The guard cannot
protect you from the blade below the workpiece.
c) Adjust the cutting depth to the thickness
of the workpiece.
Less than a full tooth of the blade teeth should be visible below
the workpiece.
d) Never hold piece
being
cut in your hands
or across
your leg. Secure the workpiece
to a stable platform.
/t
is important to support the work properly to minimize body
exposure, blade binding, or loss of control
e) Hold power
tool by insulated
gripping surfaces when
performing
an operation
where
the cutting tool may
contact hidden wiring. Contact with a "live" wire will also
make exposed metal parts of the power tool "live" and shock
the operator.
When ripping always use a rip fence or straight edge
guide. This improves the accuracy of cut and reduces the
chance of blade binding.
g) Always use blades with correct size and shape (diamond
versus round) of arbor holes. Blades that do not match the
mounting hardware of the saw will run eccentrically, causing
loss of control.
h) Never use damaged or incorrect blade washers or bolt.
The blade washers and bolt were specially designed for your
saw, for optimum performance and safety of operation.
Further
Safety
Instructions
for All Saws
CAUSES AND OPERATOR PREVENTION OF KICKBACK:
•
Kickback is a sudden reaction to a pinched, bound or misa/igned
saw blade, causing an uncontrolled saw to rift up and out of the
workpiece toward the operator,"
•
When the blade is pinched or bound tightly by the kerr closing
down, the blade stalls and the motor reaction drives the unit rapidly
back toward the operator,"
•
If the blade becomes twisted or misaligned in the cut, the teeth at
the back edge of the blade can dig into the top surface of the wood
causing the blade to climb out of the kerf andjump back toward the
operator.
Kickback is the result of saw misuse and/or incorrect operating
procedures
or conditions and can be avoided by taking proper
precautions as given below."
a) Maintain
a firm grip with both hands on the saw and
position
your arms to resist kickback forces. Position
your body to either side of the blade, but not in line with
the blade. Kickback could cause the saw to jump backwards,
Tabla de contenido
