Removing The Front Panel; Attaching The Front Panel; Switching The Dsp Setting Mode - Pioneer DEH-P9600MP Manual De Instrucciones

Before You Start
! When removing the front panel, be sure to
hold the corrugated release button on the rear
of the front panel while pulling.
All manuals and user guides at all-guides.com

Removing the front panel

1 Press OPEN to open the front panel.
2 Slide and remove the front panel to-
ward you.
Take care not to grip it too tightly or to drop it.
Release button
3 Put the front panel into the protective
case provided for safe keeping.

Attaching the front panel

1 Make sure the inner cover is closed.
2 Replace the front panel by clipping it
into place.
Switching the DSP setting
mode
This unit features two operation modes: the 3-
way network mode (NW) and the standard
mode (STD). You can switch between modes
as desired. Initially, the DSP setting is set to
the standard mode (STD).
! After switching, reset the microprocessor.
Section
01
7
En