Philips Lumea BRI958 Manual Del Usuario página 10

- Always check the device before you use it. Make sure that the SmartSkin
sensor window is clean when using the device, to avoid improper
operation (see 'D Clean & store after treatment').
- The adapter, light exit window and the filter of the attachments can
become very hot ( >210 °C/>410 °F ) during usage. Always let the adapter,
the light exit window as well as the filter and inner parts of the
attachments cool down before you touch them.
- This device has a detachable power supply unit that is IEC 60601-1 and
IEC 60950-1 class II compliant. Only use the adapter provided with this
device. Do not use an extension cord. The reference number
(AD2069x20020HF) can be found on your device. The 'x' in this number
refers to the plug type for your country.
- Never leave the product unattended when it is plugged in.
- Always unplug the product when it is fully charged.
- Do not expose the device to direct sunlight or to high temperatures (near
hot stoves, in microwave ovens or on induction cookers). Batteries may
explode if overheated.
- If the battery is damaged or leaking, avoid contact with skin or eyes. If this
occurs, immediately rinse well with water and seek medical attention.
- If the device behaves in a different way during your normal routine (e.g.
abnormal smell or vibrations, longer charging time) stop using and
charging your device and contact customer support for help.
- Follow the recommended treatment schedule. Increasing the frequency,
especially in the initial phase, can increase the risk of skin reactions.
11
English