Warnings - Fiorenzato XGR Manual De Instrucciones

EN - WARNINGS
• Read thoroughly and stick closely to the in-
structions and warnings.
• Before use, ensure that the mains voltage is the
same as the voltage indicated on the data plate
of the machine.
• Connect the grinder-doser only to 10 A sockets
that are efficiently earthed.
• Always remove the plug from the socket be-
fore carrying out any maintenance or cleaning
of the grinder-dosers.
• Singlephase models are supplied complete
with cable and plug for connection to the sock-
et.
• Any tampering with the grinder-doser or con-
nections not complying with the above indica-
tions invalidate the manufacturer's guarantee.
• Do not operate the grinder-doser without cof-
fee in the hopper.
• Never tamper with the machines in any way.
• For any intervention on the machines, always
apply only to the authorized service centre.
• Never pull the power cable to remove the plug
from the socket.
• Only use the grinder-doser for the purposes it
is meant for.
• Position the grinder-doser a minimum of 5 cm
from walls so as to allow good ventilation.
• Keep the grinder-doser away from sinks and
jets of water.
• Never leave the grinder-doser unguarded
when switched on.
• This grinder-doser is not to be used by people
with limited mental or physical abilities or by
children less than aged 8, or by people lacking
in the appropriate knowledge or experience,
unless properly supervised by someone re-
sponsible for their safety.
• Children must be supervised to make sure they
don't play with the appliance.
• Cleaning and maintenance must not be done
by children without supervision.
• Never switch on the grinder-doser if it seems
to be faulty.
• Use only original accessories and parts.
• To avoid the danger of fire, never cover the
grinder-doser.
• If the power cable is damaged, it must be re-
placed by the manufacturer, its technical de-
partment or a person with similar experience
in order to avoid any risk.
• Unplug the grinder-doser from the mains
when not in use for a long period.
• Let the grinder-doser cool down before mov-
ing it.
• In the interest of safety, the grinder-doser must
always be considered connected and live.
• Take care, as the grinding blades may continue
rotating for a short while even after the grind-
er-doser is switched off.
• Do not let liquids of any kind come into con-
tact with the internal or external parts of the
grinder-doser.
• Never put ground coffee in the hopper intend-
ed only for coffee beans.
• Do not tamper with the grinder-doser.
• Do not touch the grinder-doser with damp or
wet hands or feet.
• The hopper must be fastened to the grinder-
dosers grinding system by means of the rel-
evant screw which must be inserted in the
threaded hole located on the upper grinding
blade holder and in the hole on the neck of the
hopper.
• The manufacturer cannot be held responsible
for bodily injury or damage to property if these
regulations are not complied with.
• For USA and CANADA - duty cycle:
25s "ON" | 60s "OFF"
If the grinder-doser is to remain inactive for
a long period, clean it carefully, wash and dry
the hopper and leave it open.
ATTENTION: Moving parts.
6