Separate Setting Mode 2 - Mitsubishi Electric PAR-SL101A-E Serie Manual De Instrucciones / Manual De Instalación

6. Function settings
D
B
K
en
2
4
2
10
G
L
9
3
6
Fig. 6-4
6.5. Separate setting mode 2 (Fig. 6-4, Fig. 6-5)
1) Switching to the separate setting mode 2
After switching to the function setting mode (6.1.),
hold down the
• The pattern number K blinks.
2) Horizontal airflow direction setting (The factory
setting is "01".)
1. Press the
• The horizontal airflow direction setting G
blinks.
2. Press the button 4 to select the setting No. D.
Horizontal airflow direction
setting G
(Disabled)
(Enabled)
* If the setting is incorrect, press the
6 and repeat the procedure from step 1.
3) Direct/Indirect airflow setting (The factory setting
is "02".)
1. Press the
• Direct/Indirect airflow setting L blinks.
2. Press the button 4 to set the setting No. D.
Direct/Indirect airflow
setting L
No display (Disabled)
(Enabled)
* If the setting is incorrect, press the
6 and repeat the procedure from step 1.
4) Weekly timer setting (The factory setting is
"02".)
1. Press the
• The weekly timer
2. Press the button 4 to set the setting No.
Weekly timer setting B
No display (Disabled)
(Enabled)
* If the setting is incorrect, press the
6 and repeat the procedure from step 1.
button 2 for 5 seconds.
button 9.
Setting No. D
01
02
button
button 3.
Setting No. D
01
02
button
button 2.
blinks.
B
Setting No. D
01
02
button
.
D